MATLAB+Simulink通信系统建模与仿真实例精讲 Matlab源程序我要分享

MATLAB+Simulink modeling and simulation of communi

actionscript matlab 通信 源程序 系统 仿真 MATLABSimulink 实例 建模 精讲

关注次数: 307

下载次数: 2

文件大小: 243.68 kB

代码分类: 其他

开发平台: matlab

下载需要积分: 2积分

版权声明:如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

代码描述

中文说明:MATLAB+Simulink通信系统建模与仿真实例精讲基于最典型的通信系统设计基础,包括以下的系仿真:DS_CDMA和OFDM等典型通信系统仿真源代码。(1)Chapter02:.MDL格式文件为仿真文件, 在MATLAB窗口输入"simulink"命令打开仿真器,然后选择菜单命令“File->Open”便可选择仿真文件来打开。(2)系统实例章节:包括仿真代码(WORD格式)和仿真文件(.m格式)。文件打开运行的环境为matlab7.0及其以上版本。其中:OFDM通信系统中的主程序是main_OFDM.m;MIMO通信系统中的主程序是main_STBC_MIMO_OFDM.m;DS_CDMA通信系统中的主程序是main_ DSCDMA.m;IS95前向链路系统中的主程序是main_IS95_forward.m,读者运行各通信系统的主程序就可以进行系统仿真。


English Description:

MATLAB+Simulink modeling and simulation of communication systems explains the fundamentals of communication systems based on the most typical design, consists of the following simulation: DS_CDMA and communication systems such as OFDM simulation source codes. (1) Chapter02:.MDL format file is a virtual file,  in MATLAB window, enter the "simulink" command to open the emulator, and then select the menu command "File->Open" will be able to select the simulation file to open. (2) the system instance sections: include simulation codes (WORD format) and simulation files (. m). File open operating environment version matlab7.0 and above. Where: OFDM communication systems in the main program is the main program is main_STBC_MIMO_OFDM.m;DS_CDMA in main_OFDM.m;MIMO communication systems communication systems main_ DSCDMA.m;IS95 forward link is the main program main program on the system is main_IS95_forward.m, reader the main program that runs the communication


代码预览